Bevelling machine CHP-21G REV
Wider optimization of welding preparation process
The definitive answer for all your beveling needs
You are here
The beveling machine CHP-21G REV combines 2 machines in 1, CHP-21 G & CHP-21G INV.
In less than 1 minute, you can turn it over to bevel in a standard or upside down position depending on your beveling requirements. Thanks to its design, you can bevel edges in X, Y, K or V in a very short time without any intermediary or dangerous work turning plates.
This high performing and flexible CHP-21G REV beveling machine will meet all your demandsfor ergonomic and intensive work. It is easy to use thanks to its simple set-up, self-feed chamfering, quick change position and bevel speed.
Optimum Productive Flexibility guaranteed for wider optimization of welding preparation process&quick return on investment.
Benefits of reversible shearing cutting bevelling machine CHP-21G REV
- Efficiency: 2 in 1 for upside-down bevels without turning any plates
- Flexibility: adapted for any kind of heavy chamfer work
- Optimization: self-feed and high speed 1.7m/min
Technical details
Performances
- Maximum bevel in one run: 20 mm*
- Maximum bevel recommended in several runs: 28 mm*
- Maximum recommended thickness: plates and tubes up to 40 mm
- Nominal thickness: plates and tubes from 9 mm to 50 mm
- Angle variation: from 20° to 45°
- Plate beveling: width min. 70 mm
- Tube bevelling: Ø min. int.100 mm
- Disc bevelling: Ø min. 350 mm
* Dimensions calculated on 400 Mpa steel, bevel length.
Specifications
Motor: three-phase
Motor power: 4 CV – 3 kW
Voltage:
- 220/380 V. 50 Hz.
- 250/440 V. 60 Hz.
- For other voltages, please consult us
Electric box with:
- Emergency stop button
- Thermomagnetic switch trip
Switcher
Net weight: 635 kg
Works height: adjustable from 850 mm to 880 mm
Built-in trolley
Scheme of bevels
Beveling of plates: Bevel in K, V, X and Y
Beveling of tubes, in horizontal position: Bevel in K, V, X and Y external or internal possible (depends on the diameter).
Beveling speed: 1,7 meters per minute.
CEVISA's advantages
- Efficiency: 2 in 1 for upside-down bevels without turning any plates
- Flexibility: adapted for any kind of heavy chamfer work
- Optimization: self-feed and high speed 1.7m/min
Accessories
Cevisa’s beveling machine is provided with:
- 3 cutters for steel (1 on machine)
- 1 set of spanners for the machine adjustment
Extras & consumables:
- Universal cutter
- Plastic rollers to avoid material marking