Bevelling machine CHP-12G REV
Fulfilling all metalworkers expectations
All-in-one beveler, completely adjustable & autonomous for long period of production
You are here
2 in 1 high performance bevelling machine, fast reverse beveler perfect for controlled activity cycles. The beveling machine CHP-12G REV provides flexibility and security to achieve the shortest lead time and optimum cost for a machine made to bevel fast, with no need for turning plates
All-in-one technologies: 2.6 m/min speed, self-feed, bevel angle adjustment, reverted positions for upside-down bevels avoiding turning plates over, easy set up and use, no supervisory control whilst beveling work.
Benefits of reversible shearing cutting bevelling machine CHP-12G REV:
- Ergonomics: designed to fulfill any bevel needs at any angle.
- Flexible: optimum idealfor wide platesdimension beveling, suited also suited for small sheets and tubes.
- Robustness for high productivity.
- All in 1 automated beveler.
- Easy to set-up and operate.
Technical details
Performances
- Speed: 2.6 m/min
- Maximum bevel in one run: 12 mm*
- Maximum bevel recommended in several runs: 17 mm*
- Maximum recommended thickness: plates and tubes up to 20 mm
- Nominal thickness: plates and tubes from 6 mm to 30 mm
- Plate beveling: width min. 55 mm (for smaller width, please consult)
- Tube bevelling: Ø min. int.100 mm
- Disc bevelling: Ø min. 350 mm
* Dimensions calculated on 400 Mpa steel, bevel length
Specifications
Motor: three-phase
Motor power: 3 CV – 2.2 kW
Voltage:
- 220/380 V. 50 Hz
- 250/440 V. 60 Hz
- For other voltages, please consult us
Electric box with:
- Thermomagnetic switch trip.
- Emergency stop button.
Net weight: 135 kg
Works height: adjustable
Reversing switch
Bevel blueprint
Plate bevelling: K, V, X and Y bevels
Pipe bevelling: vertical or horizontal position – K, V, X and Y bevels, on the inside or the outside of the tube (depending on diameters).
Bevel speed: 2.6 m/ min
CEVISA's advantages
- 2 in 1 automated beveller: reverted positions for upside-down bevels avoiding turning plates over
- Robust for high productivity – 2.6 m speed bevel
- Ergonomics : designed to fulfill any bevel needs at any angle
- Easy to set-up and operate
Accessories
Cevisa’s beveling machine is provided with:
- 3 cutters for mild steel (1 on machine)
- 1 set of spanners
Extras & consumables:
- Cutters for mild steel
- Cutters for stainless steel
- Cutters for aluminum
- Plastic rollers to avoid material marking